HomeReal EstateHow to Increase the Water Pressure in Shower

How to Increase the Water Pressure in Shower

Your water pressure is abysmal, and showering leaves you with a head full of shampoo and no fast and easy way to rinse it off? Having low water pressure can be quite frustrating and it can diminish the quality of life, and there are several reasons why this could be happening. You may be wondering how can you increase the water pressure in your shower?

What Are the Reasons for Low Water Pressure in the Shower?

Corroded or Bad Pipes

The first and main culprit could be bad and corroded pipes. If you have an older home, you could have massive build-ups of different minerals and scales, hindering the water pressure immensely. Leaks are also possible, but those would be easier to spot. Be aware that if all other reasons listed here fail to explain the low pressure, you may want to check out the option of renovating and replacing the old plumbing.

A Bad or a Dirty Showerhead

The second issue could be your showerhead. Manufacturers will create different showers with different restrictive flow filters. They save up on water, but this could lead to low water pressure depending on your overall flow. Another issue is the build-up of the same minerals and materials as in the pipes. We will cover how to fix that.

The Water Shutoff Could Be Turned to Low Pressure

The main water pipe that is going from the street or your house’s main pipe could be simply set on low. You need to make sure that the valves are completely open up and that you’re getting the maximum flow. If you have old plumbing, and if the pipes seem too corroded or out of shape, it would be best to have a plumber checking on this as you don’t want to break anything.

Water Heater Issues

Your water heater could also be an issue, all from sediment in the body of the water heater to clogged plumbing. If you figure out that this is the issue, a plumber is your best choice as cleaning heaters, and general tinkering with them requires a certain level of skill as you are working with water and electricity.

A Bad Water Pressure Regulator

Lastly, if you experience overall fluctuations in your water flow, it may be a faulty water pressure regulator that is usually installed after the main shutoff valve. Again, this would be an issue for a plumber as installing and regulating this device can be tricky.

How to Increase the Water Pressure in the Shower

So with all those possible issues, you may wonder what you can do to increase the water pressure in your shower. As you read already, some things are only manageable with professional help, but some of the things you can do are the following ones:

Clean Your Showerhead & Remove the Flow Restrictor

The first thing you should look into is your shower head. A dirty showerhead can hinder your water flow, so cleaning it could be the first step. Unscrew it and leave it overnight in a bowl of white vinegar. Rinse it off in the morning, clean any gunk with an old toothbrush, and voila, clean the showerhead. The second thing would be to remove the small rubber flow restrictor in your showerhead. Most showers have them, and it’s just a matter of opening up the showerhead and pulling the little thing out. This tip will work in the case that you have good pressure without the showerhead.

One other thing would be to get a new showerhead completely. Some showerheads will have special modes that could offer a boost in your water pressure. So try that out, too, as this is probably the easiest solution that will work!

Check the Main Shut Off Valve and Your Home Valve

Checking the main valves and shutoffs is your second step. It may be simple as pulling the lever and opening the flow of water to your whole home.

Install a Shower Pump

A shower pump is a convenient solution that consists of a device that works by thrusting the water from your cold water storage, which needs to be above your shower. A shower pump is possible only if you have an open vented hot and cold system or a gravity-fed system. This can’t be installed on the main water line as it can damage the piping. It’s a device that is installed separately in the house, and it can be a bit noisy. Read up on the subject and consult a plumber for this solution. There are some fine details on how to install it.

Install a Power Shower

The power shower is a similar pump system that only works with the same systems as the shower pump. This device is one unit that is usually installed in the shower or behind the shower wall. It’s connected to electricity, and it mixes the hot and cold water as the water is flowing into it. Then it comes out under pressure on the other site. Again, talk to your plumber or a professional to choose the right one.

Install an Electric Shower

An electric shower is a system that uses cold water. It can be installed on any plumbing system and is ideal for those who have boiler problems or do not have enough hot water. As the water travels through the device, the water gets heated by the inbuilt heating element, and it comes out under high pressure.

The Conclusion

So with all that, we hope you learned why your water pressure could be low and what you can do to increase it in your shower. Start from the minor fixes and work your way towards a bigger solution. Consult professionals and try to find the best option for you and your home.


Srđan is a writer and nerd. Interested in how to make readable and fun content and plus all things internet.


Please enter your comment!
Please enter your name here

Must Read